無論是哪種門在被使用的期間或多或少都會發生小問題，因為門也需要進行定期的維護以及保養，那么濟南肯德基門在被應用的時候也不例外，下面針對有關肯德基門故障的詳細分析。

No matter what kind of door is used, small problems will occur more or less, because the door also needs regular maintenance, so Jinan KFC door is no exception when it is used. The following is a detailed analysis of KFC door faults.

肯德基門閉合不緊密

KFC door is not closed tightly

肯德基門開啟后，門扇閉合不嚴密，有寬度0.1cm以上的縫隙。這種情況產生原因主要由于閉門器使用頻繁、維護不及時或者閉門器本身質量問題都會產生這種情況。如果是前兩個原因造成的可以通過調閉門器關閉力度以達到維修目的，如果是產品質量問題通過更換閉門器即可。

After the KFC door is opened, the door leaf is not tightly closed, and there is a gap with a width of more than 0.1cm. This situation is mainly caused by frequent use of the door closer, untimely maintenance or quality problems of the door closer itself. If it is caused by the first two reasons, it can be repaired by adjusting the closing force of the door closer. If it is a product quality problem, it can be solved by replacing the door closer.

肯德基門門扇下垂

KFC door leaves droop

肯德基門門扇下垂，出現摩擦地面的現象。這種情況可以從地軸尋求方法。安裝技術不到位、地軸承重量小于門扇重量、地軸本身質量問題都會產生這種情況。如果是后兩個原因造成的，只能通過更換地軸問題，如果是因為安裝技術問題導致的，可以通過砸地軸以達到維修目的。圖片

KFC door leaves droop, causing friction with the ground. This situation can be solved from the earth axis. This can happen if the installation technology is not in place, the weight of the ground bearing is less than the weight of the door leaf, and the quality problem of the ground shaft itself. If it is caused by the latter two reasons, the problem can only be solved by replacing the ground shaft. If it is caused by installation technical problems, the ground shaft can be smashed to achieve the purpose of maintenance. picture

當肯德基門門扇出現了下垂現象的時候可能是由于安裝該門的時候技術不到位，還有地面承周邊的重量小于門扇的重量，以及地軸本身就有質量問題，不足以支撐門的運轉以此造成了在開關的時候會有摩擦地面的現象出現。除此之外還有一種可能就是調節螺絲因退絲造成門下垂。在出現上述的故障之后就可以對地軸進行檢查，以便更快的找出問題，方便肯德基門后續的正常使用。

When the KFC door leaf sags, it may be because the technology is not in place when installing the door, the weight around the ground bearing is less than the weight of the door leaf, and the ground shaft itself has quality problems, which is not enough to support the operation of the door, resulting in the phenomenon of rubbing the ground when opening and closing. In addition, there is another possibility that the adjusting screw causes the door to droop due to thread withdrawal. After the above-mentioned faults occur, you can first check the ground axis, so as to find out the problems faster and facilitate the subsequent normal use of KFC gate.

我們在維修肯德基門的過程中，發現還有一種常見的因素導致的門下垂，就是調節螺絲因退絲造成門下垂，探索的維修辦法是通過用內六角扳手調節兩邊的地軸達到門的升降，順時針為上升，逆時針為下降，用這種方法對門進行維修，避免更換配件，有效降低了運維成本。

In the process of repairing KFC doors, we found that there is another common factor leading to door sagging, that is, the door sagging caused by the withdrawal of the adjusting screw. The maintenance method we explored is to use an Allen wrench to adjust the floor shafts on both sides to achieve the lifting and lowering of the door, clockwise for rising, counterclockwise for falling. This method is used to repair the door, avoid replacing accessories, and effectively reduce the operation and maintenance cost.

肯德基門是一種常用于人流聚集地方的門，這種門可以幫助店門分散人流，同時從外觀上來說也具有很好的裝飾效果，所以現在大型的建筑以及高層的建筑很常見，您有安裝維修需求的話歡迎來我們網站http://www.wzweituo.com咨詢。

KFC door is a kind of door commonly used in places where people gather. This kind of door can help store doors disperse people. At the same time, it also has a good decorative effect from the appearance, so now large buildings and high-rise buildings are very common. If you need installation and maintenance, please come to our website http://www.wzweituo.com consulting service